Navigation
1967 – Vacuum control on distributor – 19692251 × $90
1958 – Molding – Door Side #36320711 × $190
1957 – 1958 – Molding – Rear Quarter #36320421 × $215
1970 – Molding – Door Side – Rear #87026351 × $140
1962 – Molding – Hood Panel #36318711 × $190
1963 1964 – Wiper Arm #14812781 × $180
1959 – Molding – Front Fender #35118361 × $250
1952 – Rochester Carburetor Bulletin1 × $10
1969 – 1970 – Molding Rear Door Sedans #87010281 × $130
1969 – Belt, Fan Air Pump #14949361 × $50
1967 – 1968 – 1969 – 1970 – Window Regulator #97165881 × $155
1950 – 1951 – 1952 – 1953 – Molding – Fender Skirt #35088161 × $220
1959 – Molding – Trim – Front Fender #36319041 × $200
1954 – 1955 – Molding – Fender Skirt #36309791 × $220
1963 – Molding – Front Fender #36321401 × $240
1979 – Fuel Tank Sending Unit – Floating Unit in Tank #16221261 × $290
1954 – Molding – Rocker Panel #35098161 × $550
1963 – Molding – Rear Quarter #36322241 × $220
1966 – Hose – Water Outlet to Heater Valve #14870321 × $140
1958 – Lens or Window Instrument Cluster #N.L.1 × $40
1967 – 1968 – 1969 – Seal #14881581 × $40
1961 – 1962 – 1963 – 1964 – Window Regulator #57117271 × $150
1956 – Pilot #14645151 × $60
1970 – Molding – Door Side – Front #87026401 × $140
1957 – Molding, Dash Insert #46938971 × $700
1967 – 1968 – Window Regulator #97092121 × $165
1970 – Molding – Door Side – Front #87026391 × $140
1964 – Hose #14797231 × $110
$190
Hood Panel, extension, front, in primer,
1964 all – 1965 75series
| Manufacturer | GM |
|---|---|
| Part Group | 8.000 |
| Part Number | 3513258 |
| Will Fit | 1964 all – 1965 75Series |
| Condition | N.O.S |
| Dimensions | 10 x 125 x 130 cm |
| Weight | 2.500 kg |
